Ingredients: Fleece made of sodium alginate, viscose fiber, polypropylene fiber. Usage instructions: 1. Check Size: For smaller dentures, trim the adhesive cushion to fit with scissors. 2. Moisten Cushion: Dip the adhesive cushion into lukewarm water for approximately 10 seconds and allow it to drain. 3. Apply Cushion: Place either side of the cushion on the moistened denture. Ensure that the rearmost 2 mm of the denture remains uncovered. 4. Press on Cushion: Press the cushion onto the dentures, starting in the center and working outwards until the cushion is smooth all over. * Tip: If adhesion begins to diminish, remove the dentures and sprinkle the cushion with Protefix® Adhesive Powder. * Note: These cushions are for full dentures only, not for partial or combined dentures. Protefix Upper Denture Adhesive Pads are designed to support upper dentures and help prevent pressure points. These cushions are made from a fine, palate-gentle fleece tissue that contains sodium alginate. When moistened, the sodium alginate enhances the adhesive power, providing effective protection against pressure spots and inflammation. They are particularly recommended for specific issues during the interim period of denture use and in cases of severe jaw degeneration, especially when the jaw is very narrow or significantly flattened.